我公司生产的耐磨陶瓷衬板管道是以 AL203为主要原料。以稀有金属氧化物为熔剂．经一千七百度高温焙烧而成的特种 刚玉陶瓷，再分别用特种橡胶和高强度的 有机／无机粘合剂组合成的产品。

产品特点

1、硬度大．且抗冲击性能强

     其洛氏硬度为HRC80-90，硬度仅次于金刚石。远远超过耐磨钢和不锈锕的耐磨性能。试验表明10公斤重钢球从3米高处自由落体冲击内衬陶瓷片20次。陶瓷片不碎裂。不脱落。

2、耐磨性能极好

     粘贴陶瓷耐磨管的耐磨性相当于锰钢的266倍．离铬铸铁的171.5倍．在同等工况下．可至少延长设备使用十倍以上。

I produced the wear-resistant ceramic liner pipe is AL203 as the main raw material. With rare metal oxide as flux. The high-temperature roasting from the high-temperature of the special corundum ceramics, and then with special rubber and high-strength organic / inorganic adhesive combination into the product.

Features

1, hardness. And strong impact resistance

The Rockwell hardness HRC80-90, hardness second only to the diamond. Far more than wear-resistant steel and stainless steel actinium wear resistance. Tests show that 10 kg of heavy steel ball from the height of 3 meters free fall impact lining ceramic pieces 20 times. Ceramic pieces are not broken. Do not fall off

2, excellent wear resistance

Adhesive ceramic wear-resistant tube wear resistance equivalent to 266 times the manganese steel. From the chrome cast iron of 171.5 times. Under the same conditions. Can extend at least ten times more equipment.